Essential oils are natural aromatic extracts from plants. They are hydrophobic, hydrocarbon liquids that are valued for their aromatic, flavouring, medicinal, antiseptic, antiviral, and anti-inflammatory properties. The extraction methods used to obtain essential oils include steam distillation, solvent extraction, CO2 extraction, cold-press extraction, and water distillation. Steam distillation is the most common extraction technique, where pressurised steam is passed through the plant's biomass, rupturing the plant structures that hold the essential oils. The resulting liquid is condensed and naturally separates into two layers: essential oil and hydrosol. Cold-press extraction, on the other hand, is a traditional method used for oils that degrade when exposed to heat, such as citrus fruits. This method involves pricking the fruit peels and then pressing and rinsing the oils away using water. Solvent extraction uses ethanol, methanol, or petroleum-based hydrocarbon solvents to flow through the plant material and release the essential oils. CO2 extraction, a newer and more advanced technology, uses carbon dioxide as a solvent and is highly tunable, allowing for the extraction of targeted compounds while leaving behind undesirable constituents.
Characteristics | Values |
---|---|
Extraction Methods | Steam Distillation, Solvent Extraction, CO2 Extraction, Maceration, Enfleurage, Cold Press Extraction, Water Distillation, Hydro Distillation |
Raw Plant Material | Flowers, Leaves, Wood, Bark, Roots, Seeds, Peel |
Steam Distillation Process | Steam is injected through the plant material, releasing the plant's molecules and turning them into vapour |
The vapour travels to a condensation flask, where hot water exits and cold water enters, turning the vapour back into a liquid | |
The liquid by-product collects in a receptacle, with the essential oil floating on top of the water | |
Solvent Extraction Process | Food-grade solvents like hexane and ethanol are used to isolate essential oils from plant material |
Maceration Process | Plant material is finely cut, crushed, or ground into a moderately coarse powder |
Enfleurage Process | Fat (usually lard or tallow) is spread over glass plates and allowed to set |
Fresh flower petals or whole flowers are placed on the fat and pressed in, allowing their scent to seep into the fat | |
The fat and fragrant oil mixture is washed with alcohol to separate the botanical extract from the remaining fat | |
Cold-Press Extraction Process | The whole fruit is placed in a device that mechanically pierces it to rupture the essential oil sacs |
The fruit is pressed to squeeze out the juice and oil, which are then separated | |
Water and Steam Distillation | Plant material is immersed in water, with steam fed into the still from the outside |
Hydro Distillation | Plant matter is boiled in water, with the steam collected, cooled, and condensed back into a liquid where the oil is at the top |
What You'll Learn
- Steam distillation
- Solvent extraction
- Maceration
- Enfleurage
- Cold-press extraction
Steam distillation
The vapour then travels to the condensation flask, or the Condenser, where it cools and turns back into a liquid. This liquid collects in a separator, where the essential oil and water naturally separate, as they do not mix. The essential oil is then siphoned off, with the process being completed in a few hours or several days, depending on the plant.
This method is best suited to delicate aromatics, and plants that yield low amounts of oil. It is also useful for plants that are unable to withstand the pressure and distress of other methods. Steam distillation also produces a finer fragrance than other distillation methods.
However, the molecular composition of both the plant matter and the essential oil are changed due to the temperature applied during the steam distillation process. This differs from CO2 extraction, where the molecular composition remains closer to the original plant.
Leafhoppers: A Pest Problem for Plants?
You may want to see also
Solvent extraction
Vanilla extract is an example of a commonly used solvent extraction. The essential oils from the vanilla bean pods remain in the alcohol, which was used to extract the desirable aromatic compounds.
Esperanza Plant Not Blooming? Try These Tips to Help
You may want to see also
Maceration
The process of maceration involves leaving plant material in a carrier oil (e.g. sunflower or almond oil) for a period of time until the oil takes on the scent or the quality of the plant. The plant material is placed in a closed vessel with the solvent (menstruum) and left for about a week, being shaken occasionally. The liquid is then strained, and the solid residue (marc) is pressed to recover any remaining liquid. The strained and expressed liquids are then mixed. The maceration process is complete when the base oil has changed colour. The final maceration should be filtered of its plant material and poured into an airtight container to be stored in a cool, dry place for up to 12 months.
Macerated oils capture more of a plant's essence than distilled oils, as they capture heavier, larger plant molecules. Maceration is a more practical way to make small amounts of scented oil or oils with plant medicinal properties, as it does not require huge amounts of plant material, specialist equipment, or a high cost. Macerated oils are also ready to use and do not need diluting before being applied to the skin, as with essential oils.
White Flowers in Michigan: Native Plants with Pure Blooms
You may want to see also
Enfleurage
Cold Enfleurage
In cold enfleurage, a large glass plate called a chassis is smeared with a layer of animal fat, usually lard or tallow, and allowed to set. Fresh flower petals or whole flowers are then placed on the fat and pressed in. The flowers are left for 1-3 days or a couple of weeks, depending on the type of flowers used. During this time, their scent seeps into the fat. The depleted petals are then replaced with fresh ones, and the process is repeated until the fat reaches the desired level of fragrance saturation.
Hot Enfleurage
Hot enfleurage, also called maceration, involves heating solid fats and stirring in the botanical matter. The spent botanicals are strained from the fat and replaced with fresh material until the fat is saturated with fragrance. This method is considered the oldest known procedure for preserving plant fragrance substances.
Final Steps
In both types of enfleurage, once the fat is saturated with fragrance, it is called the "enfleurage pomade". The pomade can be sold as is, or washed with ethyl alcohol to draw the fragrant molecules into the alcohol. The alcohol is then separated from the fat and allowed to evaporate, leaving behind the absolute of the botanical matter. The spent fat is often used to make soap.
History and Applications
Methane's Impact: Friend or Foe to Plants?
You may want to see also
Cold-press extraction
The process involves mechanically piercing the whole fruit with a device to rupture the essential oil sacs, which are located on the underside of the rind. The essential oil and pigments are collected in the device's collection area. The fruit is then pressed to squeeze out the juice and oil. The oil and juice produced are then centrifuged to filter out the solids. Finally, the oil is separated from the juice and siphoned off into another receptacle.
Cold-pressed oils retain natural flavours, colours, sterols, and vitamins. However, not all plant biomass is suitable for cold pressing, and the process is not efficient for high-volume extraction.
Caffeine-Infused Plants: Exploring Nature's Energy-Giving Species
You may want to see also
Frequently asked questions
Essential oils are natural aromatic extracts from plant material, including grasses, leaves, flowers, needles, twigs, peels of fruit, seeds, bark, roots, and underground stems. They are hydrophobic and contain volatile chemical compounds.
Common extraction methods include steam distillation, cold pressing (or expression), and solvent extraction.
Botanicals are placed into a still and pressurized steam is forced through them. The steam forces open pockets of aromatic compounds, which escape from the plant material and evaporate into the steam. The steam then passes through a cooling system where it condenses into a liquid, with the essential oil floating to the top for separation.